Section Menu

Power Engineer Integrated Degree Apprenticeship - Power Engineering (Transmission and Distribution) MEng (Hons)

Overview

Paradigm shifting innovations

Power engineers focus on some of the most complex and fundamental engineering challenges within the energy sector. Paradigm shifting innovations are already influencing the whole of industry and society.

As an apprentice you will complete an integrated masters degree that will support the fundamental scientific and mathematical principles to equip you with the understanding required to operate effectively and efficiently at a high level within this sector. Most of your time will be spent working for your employer, developing skills specific to your own role. The degree you will study is Power Engineering (Transmission and Distribution) MEng (Hons).


The full apprenticeship standard and assessment plan can be found on the Government website.

Apprenticeship Employment Guidelines
Apprenticeship Evidence Pack Guidance

Why Power Engineering at LSBU?

No. 1 London modern uni for graduate prospects in Electrical and Electronic Engineering (Complete University Guide 2019).
Accredited by the Institution of Engineering and Technology (formerly the IEE) under licence from the Engineering Council, and offer fast track progression to Chartered Engineer status.
Dedicated facilities: We have an electronic projects room and specialist labs.

No.1 for student to staff ratio amongst London modern competitors (Guardian 2019).

Key course information - ordered by mode
Mode Duration Start date Location
Mode
Apprenticeship
Duration
6 years
Start Date
September
Location
Southwark Campus

Case studies

Modules

Our degree programme is based on sound established technical foundations and combines coverage of fundamental principles common to all engineering disciplines, with specialist modules tailored to the needs of the specialist stream.  Our part-time degree programmes follow a 6-year day release (full day and evening) delivery model, with modules constituting either 100 or 80 credits each academic year.

Through the Degree Apprenticeship delivery model, we work directly with employers to ensure work-based projects are embedded into your learning whilst ensuring those projects are relevant to the workplace and are of benefit to the business.

Level 4

  • Introduction to electrical and electronic engineering
    This module will cover the essential material relevant to the fundamentals of both electrical and electronic engineering. Starting with basic circuit elements, Ohm’s Law and Kirchhoff’s Law, the first half of the module will introduce basic and more advanced circuit analysis techniques such as Node Voltage and Mesh Current methods, progressing onto Source Transformation techniques and the basics of semiconductors (Diodes, BJTs and Op-Amps). Then, the electrical part will cover DC responses of RC, RL and RLC circuits and finally AC sinusoidal circuit theory and power systems and three phase circuits. Assessment methods: 50% coursework, 50% exam.
  • Engineering mathematics and modelling
    This module consolidates the mathematical skills that underpin the BEng engineering degrees. It's specifically designed to cater for the wide differences in mathematical background of 1st year students, as well as to prepare you for the Advanced Mathematics module that you'll take in the second year. Assessment methods: 50% coursework, 50% exam.
  • Design and practice
    This module will cover material design activities, team work, creative problem-solving, project management, sustainable development principles, personal development planning, report writing communication, Computer-Aided Design (CAD), employability and transferable skills. It's also a work-based module for part-time students, utilising the Virtual Learning Environment (VLE) to provide supporting teaching material and assessments. Assessment method: 100% coursework.
  • Engineering computing
    This is an introductory module that will address the engineering formation as well as programming knowledge and skills. It will enable you to appreciate the role and importance of software and computers in engineering, and so provide you with the impetus to quickly become competent in their use. Assessment method: 100% coursework.

Optional modules:

  • Engineering principles
    This module will help you develop your understanding of essential scientific principles for the study of engineering to degree level. It's designed to be accessible to students with a range of prior science specialisation. The module comprises two blocks of study. These will introduce the principles of measurement systems and units, thermal physics and mechanical and electrical principles. Assessment methods: 40% coursework, 60% exam.
  • Principles of power generation, transmission and distribution

Level 5

  • Electrical machines and power electronics
    This module adopts a modern approach to the study of electrical machines, 3-phase transformers and power electronic converters. The treatment emphasises the features common to all types of electrical machines and power electronic converters and then develops basic performance equations and equivalent circuits and applies them to common electrical machines and power converters in current use. The associated laboratory workshop features work on typical electrical machines and power converters. Assessment methods: 30% coursework, 70% exam.
  • Advanced mathematics 
    This module covers undergraduate advanced engineering mathematics to enable you to consider and model a variety of relevant engineering problems (e.g. electrical, mechanical, petroleum, chemical, computer, civil). 

Optional modules:

  • Principles of control
    This module aims to give a sound understanding of a range of topics in Control Systems Engineering. It will impart methods to model and analyse dynamical systems met in the engineering of systems such as robotics, automobiles, aircraft, automatic machinery, chemical process plant, etc. It will teach you to determine the stability of a system and to predict system responses in the time domain (transient and steady state) and in the frequency domain, as well as to handle the interconnection of many Single Input Single Output systems connected in feedback and feed forward configurations. The module will provide you with methods to specify supervisory control and data acquisition systems, and to modify the behaviour of a given system by using feedback control to improve stability, to make the system act quickly and precisely, and to reduce the effect of disturbances. Learning will be supported by a laboratory workshop that enables the study of control systems using both analysis methods and computer simulation using MATLAB and SIMULINK. Assessment methods: 30% coursework, 70% exam.
  • Circuits, signals and systems
    This module introduces methods to mathematically model circuits, signals and systems required for the engineering of electrical, electronic, telecommunication and control systems. It shows how to model and analyse complex signals with Fourier series, Fourier transforms and Laplace Transforms. The direct and indirect method of convolution is used to find the time response of systems to given inputs. First and second order LTI dynamical systems are modelled with transfer functions and their zero-state and zero-input responses predicted when the inputs are any function of time. The frequency responses of some common LTI two port filter circuits are studied. A MATLAB/SIMULINK workshop enables understanding of signal synthesis using the Fourier series, finding the frequency spectra of complex and noisy signals using FFT, and the time response and the frequency response of systems. Assessment methods: 30% coursework, 70% exam.
  • Team design project
    This is a skills-based module developing your understanding of the design process within engineering, including factors that need to be taken into account in identifying and meeting requirements for new products(used to mean outcome of a process and can include specifications for a tangible product, or process, or system), such as working within Regulatory, professional and Standards requirements, developing practical skills, working as part of a team, handling information, project planning and management, and report-writing and presentation skills. Assessment method: 100% coursework.
  • System operation and SCADA

Level 6

  • Innovation and enterprise
    In the rapidly changing world around us, it's imperative that you're able to think dynamically to create advantage in your life. This module encourages you to question what you see and experience around you and in your prospective engineering field with an aim to enhance your creativity to discover new and better ways of doing things. It aims to equip you with methods and processes to recognise opportunities and to plan on harnessing commercially viable benefits that may exist from exploiting those opportunities in a sustainable fashion. This might be a product or service (such as consultancy or contract management). The application of project management principles will help to define the critical path of a proposed business and how the many processes involved (planning, market research, market placement, finance, operations, human resources etc.) are interlinked throughout the initial planning exercise and how they can change over time. You'll be expected to reflect on what you can contribute towards a group. Assessment method: 100% coursework.
  • Individual project
    The Individual Major Project requires you to plan, execute, review and report upon a major piece of technical work directly related to your degree discipline. In this regard, this module provides you with the opportunity to develop a high degree of subject-specific expertise. This module differentiates from others on the course taken due to the high degree of autonomous study expected. This flexibility should be seen as an opportunity to explore new areas of interest and to acquire new and often unexpected skills. The work undertaken within the project will require you to develop your own methodology in advance of presenting solutions to the studied problem. It's therefore expected that project will include evidence and demonstration of detailed research of the subject matter, practical demonstration of understanding of the material, testing and evaluation of the practical elements, detailed reporting, discussion and conclusions of the entire project, and a high level of written presentation and grammar skills. Assessment method: 100% coursework.

Optional modules:

  • Electrical energy converters and drives
    This module provides a broad understanding of the theory and application of power electronic circuits in the areas of power conversion and electrical machine drives. The material covered is particularly relevant to students in the area of electrical building services, where a significant proportion of electrical plant and drives will have power electronics and microprocessor control components. It's suitable for students who work in organisations that specify, design, commission, operate and maintain all types of electrical power infrastructure and/or who wish to pursue further study afterwards at Masters level or above. You'll be equipped with the essential theory and practice, enabling you to assess modern trends in the subject and maintain and update your knowledge. Assessment methods: 30% coursework, 70% exam.
  • Industry and environment
  • Industry and regulations

Level 7

  • Technical research and professional skills
    This module provides training for the skills that are necessary for successful completion of Master's level studies in the near future and for professional development in the long-term. More specifically, the course teaches how to search and gather relevant technical information, how to extract the essence from a piece of technical literature, how to carry out a critical review of a research paper, how to write a feasibility report, how to give presentations and put your thoughts across effectively, and how to manage a project in terms of time and progress in a group project environment. These are designed to enhance the technical and analytical background that is necessary for the respective Master's stream. Assessment method: 100% coursework.
  • Power systems engineering
    The material in this module covers the analysis and operation of power transmission and distribution networks at 11kV and above forming the ‘supply’ side of electrical power networks, under both steady state and transient conditions. It provides a broad understanding of the elements of power systems and their application in the areas of power conversion, power transmission, fault analysis and protection integrated into the supply network. It's suitable for students who work in organisations that specify, design, commission, operate and maintain all types of electrical power infrastructure. The material covered is particularly relevant to students specialising in the area of electrical building services. You'll be equipped with the essential theory and practice enabling you to assess modern trends in the subject and maintain and update your knowledge. Assessment methods: 30% coursework, 70% exam.
  • Group project

Optional modules:

  • Power generation components - testing and maintenance
  • Power systems network architecture

Employability

Employability Service

By completing the apprenticeship route, you’ll have the advantage of having real-world work experience, working in a role related to your area of study. This will give you a competitive edge among other graduates when you complete your apprenticeship standard.

During your studies – and for two years after you graduate – you’ll have access to our Employability Service, who can help you develop your skills through the Careers Gym workshops and presentations. Our JobShop advisers support students and graduates with finding the right job for them.

We are University of the Year for Graduate Employment - The Times and Sunday Times Good University Guide 2018.

Placements

Staff

Dr Safia Barikzai

School/Division: Engineering / Computer Science and Informatics
Job title: Associate Professor

Safia is a business IT Pathway Leader and Informatics Placement coordinator, actively looking for placement links with potential employers.


Alessio Corso

School/Division: Engineering / Mechanical Engineering and Design
Job title: Senior Lecturer

Alessio has lectured in Higher Education since 2010 and has worked in industry as a Product Design Engineer, specialising in medical products.


Dr Sandra Dudley

School/Division: Engineering / Electrical and Electronic Engineering
Job title: Director of Research and Enterprise

Sandra specialises in the areas of radio and optical communication system design, assistive living and sensor systems and is a member of the School Academic Standards Committee.


Prof. Mohammad Ghavami

School/Division: Engineering / Electrical and Electronic Engineering
Job title: Professor of Telecommunications Engineering

Mohammad Ghavami is Professor of Telecommunications Engineering and the founder and leader of BiMEC research group. His research interests include UWB, smart antenna systems and biomedical applications of wireless technology.


Dr Saim Memon

School/Division: Engineering / Electrical and Electronic Engineering
Job title: Senior Lecturer in Electrical Engineering

Dr Saim is a Senior Lecturer in Electrical Engineering. He is a Fellow of HEA and has a qualified teacher status with GTCS. He specialises in solar energy materials for sustainable low-carbon buildings and smart vacuum insulated windows.


Dr Jon Selig

School/Division: Engineering / Mechanical Engineering and Design
Job title: Associate Professor

Dr Selig's research interests are in the area of geometry and robotics.


Dr Maz Shirkoohi

School/Division: Engineering / Electrical and Electronic Engineering
Job title: Director of Magnetics

Maz’s main area of expertise is in the electrical and electronic engineering area. He also has specific expertise in electromagnetic materials, power engineering, power systems and power electronics.


Kate Viscardi

School/Division: Engineering / Electrical and Electronic Engineering
Job title: Senior Lecturer


Dr Perry Xiao

School/Division: Engineering / Electrical and Electronic Engineering
Job title: Associate Professor; Course Director, MRes in Electrical and Electronic Engineering

Dr Xiao's research focuses on the development of novel infrared and electronic sensing technologies for skin measurements and industrial Non-Destructive Testing. He is also a director and co-founder of Biox Systems Ltd, a university spin-out company, which designs and manufactures AquaFlux (trans-dermal water loss measurements) and Epsilon (capacitive imaging).


Facilities

Teaching and learning

End point assessment

The apprentice will take all the assessments of the embedded degree programme. They will create, maintain and complete an e-Portfolio/ logbook and carry out two projects towards the end of the apprenticeship.

An independent assessor will take a holistic view of the learner’s competencies and judges whether they meet the outcomes of the standard.

The End Point Assessment will be carried out by the University, and be based on the e-Portfolio/Logbook and level 6 and 7 projects, and an interview.

Duration

Completing this Apprenticeship Standard this typically takes 6+ years, which incorporates a 6-year day release integrated Master of Engineering (MEng) Degree.

Employers offer the development of occupational and professional competence and provide opportunity for Apprentices to demonstrate their engineering management and leadership skills to demonstrate Chartered Engineer (CEng) competence.

Entry requirements

In order to apply for entry to this Degree Apprenticeship, apprentices must meet the entry requirements for the MEng (Hons) Power Engineering degree programme. These are:

  • A Level AAB or;
  • BTEC National Diploma DDD or;
  • Access to HE qualifications with 24 Distinctions and 21 Merits or;
  • Equivalent level 3 qualifications worth 128 UCAS points
  • Applicants must hold 5 GCSEs A-C including Maths and English or equivalent (reformed GCSEs grade 4 or above).

We welcome qualifications from around the world. English language qualifications for international students: IELTS score of 6.0 or Cambridge Proficiency or Advanced Grade C.

How to apply

International (non Home/EU) applicants should follow our international how to apply guide.

Instructions for Home/EU applicants
Mode Duration Start date Application code Application method
Mode
Apprenticeship
Duration
6 years
Start date
September
Application code
5204
Application method

An Apprenticeship Standard is comprised of a programme of study, an End Point Assessment and on-the-job learning. This means that in addition to meeting academic requirements, you’ll  need to be employed in a role related to your apprenticeship. The process of applying depends on whether you have an employer to sponsor (and support) you.

If you are employed and your employer has confirmed they will support your apprenticeship:

You are welcome to submit an application via our online application system. You’ll need to provide details of your employment/employer as part of the application. You’ll also need to ensure you and your employer meet the requirements – find out who can be an apprentice to see if you meet the entry requirements and employer commitments to find out more about your employer’s role.

If you are not employed:

  • You will need to find a job role related to the apprenticeship you wish to apply for, with an employer who is happy to support you. If you would like to find an employer to support your apprenticeship with LSBU, you can search which employers are currently advertising Apprenticeships via the National Apprenticeship Service website searching for ‘London South Bank University’ as keywords.
  • If there are no search results, this means there are currently no vacancies. We update our vacancies regularly, so please do check back regularly.
  • Many employers advertise their apprenticeship vacancies on their websites or via other portals. You could search for ‘find an apprenticeship’ online.
  • When you’re ready to apply, see the government's advice on how to write a winning apprenticeship application and make your application using our online application system.

Further information for apprentices

If you’re a prospective apprentice, you can find out more about who can be an apprentice on our student pages.

Further information for employers

If you’re an employer, you can find information about the employer commitments and further related information on the related pages for business.

Fees and funding

Funding

The cost of the apprenticeship is paid fully by the employer (sometimes part funded by the government) through apprenticeship levy. The apprenticeship levy is a pot of money some companies pay into, which all businesses have access to spend on the training costs of apprenticeships. Companies fall into two categories: levy-payers (who pay into the pot) and non-levy payers (who do not). You can find out more in our Levy and Funding section, specifically for employers

The apprentice does not contribute toward the cost of study.

Bands

Apprenticeship standards are all assigned a funding band by the Government – these funding bands are the maximum amount the Government will fund via the levy towards a given apprenticeship standard. There are currently 30 funding bands ranging from £1,000 to £27,000.

Incentives

Employers with less than 50 staff sending an apprentice aged 16-18 will have 100% of the training costs paid by the government. All employers who employ an apprentice aged 16-18 on the first day of teaching will receive a £1,000 incentive from the government. You can find out more in our Levy and Funding section, specifically for employers.

Cost

You can find out the funding band for an Apprenticeship Standard on the Government website. To find out how much we are charging, please get in touch with us at apprenticeships@lsbu.ac.uk

Field trips

Some modules include field with and site visits, which may be residential or outside the United Kingdom, ranging from three to five days. These are organised by the Division and students   are required to contribute towards the cost.  If there are any field trips or any course visits as part of your course, we will let you know in good time.

Case studies

Select a case study and read about practical project work, students' placement experiences, research projects, alumni career achievements and what it’s really like to study here from the student perspective.

Prepare to start

There are steps the apprentices, the employer and the University need to complete before you start your course. Take a look at the steps to be completed in the New Students: Apprentices section. Employers may also like to look at our steps to offering an apprenticeship.

 
Top of page
Contact information

Course Enquiries - UK

Tel: 0800 923 8888

Tel: +44 (0) 20 7815 6100

Get in touch

Course Enquiries - EU/International

Tel: +44 (0) 20 7815 6189

Get in touch
 
Top of page